Our professional grade LED lighting kit is engineered specifically for fireplace chambers, inglenooks and other high temperature environments. Each flexi strip is built to order and manufactured using heat resistant materials to ensure long term performance, safety, and reliability.
The LED strip is supplied in a 3000K Warm White tone to create an authentic fire-glow ambience. It is cut precisely to the required length, fitted with a 3000mm heat-resistant cable, and fully re-sealed with silicone for enhanced heat protection and IP67 waterproofing.
All soldering and assembly are completed by specialists, with a 24-hour curing process to guarantee durability. To achieve adjustable ambience, the kit includes an optional 24V LED dimmer (deductible if not needed).
A compact, IP67-rated non-dimmable LED driver is supplied as the power source; both the driver and dimmer must be positioned away from heat. Heat-resistant silicone mounting clips and screws are provided for secure installation within a fireplace chamber.
What’s in the box?
- Strip: Heat resistant strip, 3000K, assembly and soldering. – Various lengths.
- Cable: Heat resistant cable, 3000mm, assembly and soldering.
- Driver: Non-dimmable LED driver, Both water and dust proof. Please isolate away from any heat. Dimensions: L130×W25×H22mm.
- Clips & Screws: Heat Resistant Silicon clips and screws. (5-20 pcs clips / 10-30 screws inside) – Dependant on length.
- Controller:

- LED Dimmer 24V (12-48Vdc). Rated 8A (96W), 1 Channel. With rotary knob. This usually lives next to the LED driver and keep away from heat. Dimensions: L66xW59xD32mm.

- LED Controller (Single Colour, Dimmable), Controls brightness of your LED strip. Suitable for 12–24V systems with reliable wireless control (up to 30m range). Compact size: 75 × 36 × 17mm
- Simple handheld remote for adjusting brightness and switching on/off.
Optional Controller Upgrade
Prefer a wall switch instead of a remote? A wireless light switch is available.
Placement:
Designed specifically for fireplace chambers, our heat-resistant LED strip provides a clean, even illumination across the opening.

For optimal performance, the strip length should be selected at approximately 100mm less than the width of the fireplace opening. This ensures a balanced light spread without overpowering the chamber.
The LED strip is best installed on the rear of the front face, positioned just above the fireplace opening, allowing the light to wash downwards and highlight the interior for a refined, ambient effect.
Not onto the rear wall of the chamber. The led strips are not to be seen.
Technical Highlights
- Colour temperature: 3000K Warm White
- Strip rating: IP67 heat-resistant, waterproof
- Driver dimensions: 130 × 25 × 22 mm
- Dimmer dimensions: 66 × 59 × 32 mm
- Ideal for fireplace chambers and enclosed heat-exposed spaces
- Built to order; tailored length and fully sealed construction









Reviews
There are no reviews yet.